# Product brief: Charger with display

Part number: EDGE-CH-D  
Status: Shipped  
Price: on request  
Lead time: Standard: produced to order, confirmed with the quotation. Own shroud: first batch 8–12 weeks after design freeze (indicative); repeat batches 4–6 weeks  
Brief: PB-EDGE-CH-D · rev 2.2 · September 2025  
PDF: https://edgetech.eu/briefs/display-charger.pdf  
Full product page: https://edgetech.eu/products/display-charger

Our main charger: the same grey box and electronics as the simple charger, with a transparent lid and a display behind it that shows charging state, current and energy. Use it as it is, or with your own shroud or front: a white-label charger under your name, with the MyCharger app under your name if you want it. From there it is a short way to your own enclosure and electronics through engineering.

![Charger with display: white front shroud with a colour display, three-quarter view](https://edgetech.eu/img/products/display-charger-three-quarter.webp)
![Close-up of the display: 22.1 kW, 12.00 kWh session energy, current per phase, state Charging](https://edgetech.eu/img/products/display-charger-screen.webp)
![Charger with display on the wall, orange Type 2 cable looped over the cable rest](https://edgetech.eu/img/products/display-charger-cable.webp)
![Charger with display, front view](https://edgetech.eu/img/products/display-charger-front.webp)

Sites where the user wants to see what the charger is doing without opening the app: company car parks, VvE garages, and installers who prefer to read the state at the box.

## Key facts

| Specification | Value |
|---|---|
| Display | Behind a transparent lid; shows state, current per phase, session energy; content to be confirmed |
| Shroud / front | Standard grey box, or your own shroud or front on the same box |
| Charge points per unit | 1 or 2, each on its own EVSE-C-3x32A and EVSE-X-DCD |
| Power | 1-phase 16 A or 32 A, or 3-phase up to 32 A (22 kW) per charge point |
| Connector | Type 2 socket with lock, or fixed Type 2 cable (5 m or 7.5 m) |
| Protection | DC leakage 6 mA (RDC-DD, IEC 62955) on board; upstream Type A RCD 30 mA and MCB per charge point supplied by the installer or built in |
| Load balancing | Dynamic per-second limiting with EVSE-SC-02 (P1) or EVSE-SC-01 (clamps), or wireless with GridShield |
| App and platform | MyCharger app (iOS, Android): start/stop, off-peak schedules, solar modes, consumption overview, automatic invoicing. Installer diagnostics and OTA updates. |
| Signalling | RGB status LED or addressable LED light ring, colours configurable |
| Authorisation | Plug and charge, app start, scheduled. RFID on request. |
| Metering | On-board metering (not MID). MID meter as an option for billing. |
| CE | Charge controller and site controller carry their own EU declarations of conformity; updated declarations (EN IEC 61851-1:2019, EN IEC 61851-21-2:2021, RED with EN 18031) soon. The assembled unit is declared by the party placing it on the market; we supply the technical file. |
| Manufactured | Boards and assembly in the Netherlands / EU |

## What is configurable

| Option | Choices |
|---|---|
| Shroud | Standard grey box, your own shroud or front, or your own enclosure |
| Branding | Front label, LED colours, app name and icon (white-label MyCharger), splash and support contact |
| DC leak sensor (RDC-DD) | Standard, included with every charge point |
| Charge points | 1 or 2 per unit; up to 10 per site controller |
| Connector | Socket with lock; fixed cable 5 m or 7.5 m |
| Phases | 1-phase 16/32 A, 3-phase 32 A; per-socket 1P/3P switching for solar |
| Site measurement | P1 (SC-02), CT clamps (SC-01), GridShield wireless, or none |
| Firmware defaults | Modbus address, lock type, LED type, CP disconnect behaviour, min/max current |
| Metering | On-board, or external MID meter |
| Platform | EdgeTech-hosted platform, or your own instance of the charging platform (on-premise deployable) |
| NFC reader | With or without |

## CAD and drawings

- 3D model (STEP): https://edgetech.eu/cad/display-charger.step
- Drawing (PDF, A3): https://edgetech.eu/cad/display-charger.pdf
- Drawing (SVG): https://edgetech.eu/cad/display-charger.svg

For fit and installation only, not for manufacture. Outline, mounting holes, connector positions and component height envelopes; dimensions marked ≈ are estimated.

## Contact

info@edgetech.eu · https://edgetech.eu