# EdgeTech

EdgeTech is a technology and engineering company in Utrecht that develops and integrates smart energy solutions, with EV charging as a core area: charge controllers, load balancing, Matter modules, GridShield, finished chargers under your name, and the engineering and IP to build your own.

Canonical: https://edgetech.eu/

What are you trying to build or integrate?

- Build with our electronics: https://edgetech.eu/electronics.md
- Buy finished products: https://edgetech.eu/products.md
- Integrate energy systems: https://edgetech.eu/solutions.md
- Build something different: https://edgetech.eu/engineering.md

Standards status: https://edgetech.eu/standards.md · Support for your customers: https://edgetech.eu/support.md · How to buy: https://edgetech.eu/buy.md

## Electronics

- [Edge EV Charger controller (EVSE-C-3x32A)](https://edgetech.eu/electronics/evse-c-3x32a.md), € 125 excl. VAT: AC charge controller board for one Mode 3 charge point, up to 3×32 A (22 kW), with integrated relay drive, per-phase current and voltage metering, and Modbus RTU control. The board inside most EdgeTech-based chargers since 2021.
- [RDC-DD (DC residual-current detector) (EVSE-X-DCD)](https://edgetech.eu/electronics/evse-x-dcd.md): The 6 mA RDC-DD (residual direct current detecting device) A separate product, and standard with every EdgeTech charger, charge controller and DIY kit. It lets a Type A RCD be used upstream instead of a Type B (IEC 62955).
- [Cable lock driver (EVSE-X-CL)](https://edgetech.eu/electronics/evse-x-cl.md): Drives the lock of a Type 2 charge socket from the charge controller's lock command, with position feedback. Reserve capacitors keep enough energy on board to release the lock after a power failure, so a car is never held on a dead charger.
- [NFC card reader (Modbus) (EVSE-X-NFC)](https://edgetech.eu/electronics/evse-x-nfc.md): An optional card reader that mounts inside the charger box, with its antenna side against the lid, so cards are read through the lid. It reads ISO/IEC 14443 cards and connects to the Modbus line with four wires. Use it with any card as a local lock and unlock, or with a Dutch laadpas over OCPP.
- [ISO 15118 communication module (PLC-15118)](https://edgetech.eu/electronics/iso15118-module.md): An add-on for the smart charger: HomePlug GreenPHY on the control pilot for ISO 15118 digital communication with the vehicle. With 15118-20 vehicles it shows the state of charge while charging on AC and identifies the vehicle for authorisation. Price on request; V2G under investigation.

## Products

- [Simple charger (EDGE-CH-S)](https://edgetech.eu/products/simple-charger.md): Our electronics in a generic grey box with a fixed charging cable. Mode 3, up to 3×32 A, RDC-DD included, open Modbus protocol. Option: three-colour status lights. The charger for installers and wholesalers who want a reliable unit without a brand story.
- [Charger with display (EDGE-CH-D)](https://edgetech.eu/products/display-charger.md): Our main charger: the same grey box and electronics as the simple charger, with a transparent lid and a display behind it that shows charging state, current and energy. Use it as it is, or with your own shroud or front: a white-label charger under your name, with the MyCharger app under your name if you want it. From there it is a short way to your own enclosure and electronics through engineering.
- [Plaza Charge (PLAZA)](https://edgetech.eu/products/plaza-charge.md): Up to 12 cars on one shared 3×35 A connection. Up to 12 plugs per pole between 6 + 6 parking spaces, or spread over more poles. Every car plugged in for at least 8 hours gets at least 50 km added, even with all 12 plugs in use (cars that charge on three phases). Cars can stay plugged in, and charging can follow a flexible energy contract.
- [DIY smart charging kit (EDGE-DIY-KIT)](https://edgetech.eu/products/diy-kit.md), from € 350 excl. VAT: Everything to build one smart, load-balanced charger: charge controller with 6 mA DC leak detection (RDC-DD), enclosure, 5 m 3-phase charging cable with Type 2 plug, and a site controller for your smart meter or with clamp-on current sensors. You only need a wall and a power connection. For DIY builders and installers.
- [Edge Smart Load Balancer (EVSE-SC-02)](https://edgetech.eu/products/evse-sc-02.md), € 145 excl. VAT: Current-generation site controller. Reads the DSMR/ESMR 5 smart meter through its P1 port, so it needs no clamps, sees import and export per phase, and dynamically limits up to 10 Edge charge controllers. Solar-surplus charging, WiFi, MyCharger app.
- [Edge HEMS (HEMS-00)](https://edgetech.eu/products/hems-00.md): Home energy management on the P1 port of the smart meter. The hardware of the EVSE-SC-02 with its own firmware: it measures the home on a DSMR 5 meter, shows it on a dashboard and gives an energy report after three months (best after a year). It monitors only; it controls nothing. For households € 150 incl. VAT, excl. shipping.
- [Edge Load Balancer (EVSE-SC-01)](https://edgetech.eu/products/evse-sc-01.md), € 145 excl. VAT: First-generation site controller. Measures the main connection with three CT clamps and dynamically limits up to 4 Edge charge controllers over Modbus so the site never exceeds its main fuse. WiFi to the EdgeTech platform and the MyCharger app.
- [Matter over Thread set (MATTER-SET)](https://edgetech.eu/products/matter-set.md): The wireless smart set: our charge controller with a Thread module, a P1 meter reader on the smart meter, a Matter controller that runs the load balancing, an optional SG-Ready module for a heat pump, and Thread repeaters when a device is too far from the controller. All Matter 1.4 over Thread. Not yet Matter certified (CSA); certification on the customer's request.
- [GridShield controller and receiver (GS-C-01 / GS-R-02)](https://edgetech.eu/products/gridshield.md), € 370 excl. VAT: ElaadNL-compliant GridShield over LoRa point-to-point: one hardware, two roles, sold as two products. The controller measures the main connection and sends the reduce signal; the receiver limits chargers over RS485 and other loads with two relays. Tested against ElaadNL's implementation in both directions. For neighbourhood congestion and for buildings, car parks and sites without a data cable.

Index of all pages: https://edgetech.eu/llms.txt
