# Products

Canonical: https://edgetech.eu/products

Finished units. Chargers: our electronics in a grey box with a fixed cable, simple or with display (also with your own shroud). Load balancing and grid: EVSE-SC-02 (P1) and EVSE-SC-01 (clamps) load balancers in a DIN-rail enclosure, the Matter over Thread set, GridShield controller and receiver. The party placing a charger on the market signs its CE declaration; EdgeTech supplies the technical file.

- [Simple charger (EDGE-CH-S)](https://edgetech.eu/products/simple-charger.md): Our electronics in a generic grey box with a fixed charging cable. Mode 3, up to 3×32 A, RDC-DD included, open Modbus protocol. Option: three-colour status lights. The charger for installers and wholesalers who want a reliable unit without a brand story.
- [Charger with display (EDGE-CH-D)](https://edgetech.eu/products/display-charger.md): Our main charger: the same grey box and electronics as the simple charger, with a transparent lid and a display behind it that shows charging state, current and energy. Use it as it is, or with your own shroud or front: a white-label charger under your name, with the MyCharger app under your name if you want it. From there it is a short way to your own enclosure and electronics through engineering.
- [Plaza Charge (PLAZA)](https://edgetech.eu/products/plaza-charge.md): Up to 12 cars on one shared 3×35 A connection. Up to 12 plugs per pole between 6 + 6 parking spaces, or spread over more poles. Every car plugged in for at least 8 hours gets at least 50 km added, even with all 12 plugs in use (cars that charge on three phases). Cars can stay plugged in, and charging can follow a flexible energy contract.
- [DIY smart charging kit (EDGE-DIY-KIT)](https://edgetech.eu/products/diy-kit.md), € 350 excl. VAT: Everything to build one smart, load-balanced charge point: charge controller with 6 mA DC leak detection (RDC-DD), P1 site controller, cabling, brackets and the app. For installers and wholesalers who assemble their own.
- [Edge Smart Load Balancer (EVSE-SC-02)](https://edgetech.eu/products/evse-sc-02.md), € 145 excl. VAT: Current-generation site controller. Reads the DSMR/ESMR 5 smart meter through its P1 port, so it needs no clamps, sees import and export per phase, and dynamically limits up to 10 Edge charge controllers. Solar-surplus charging, WiFi, MyCharger app.
- [Edge HEMS (HEMS-00)](https://edgetech.eu/products/hems-00.md): Home energy management on the P1 port of the smart meter. The hardware of the EVSE-SC-02 with its own firmware: it measures the home on a DSMR 5 meter, shows it on a dashboard and gives an energy report after three months (best after a year). It monitors only; it controls nothing. For households € 150 incl. VAT, excl. shipping.
- [Edge Load Balancer (EVSE-SC-01)](https://edgetech.eu/products/evse-sc-01.md), € 145 excl. VAT: First-generation site controller. Measures the main connection with three CT clamps and dynamically limits up to 4 Edge charge controllers over Modbus so the site never exceeds its main fuse. WiFi to the EdgeTech platform and the MyCharger app.
- [Matter over Thread set (MATTER-SET)](https://edgetech.eu/products/matter-set.md): The wireless smart set: our charge controller with a Thread module, a P1 meter reader on the smart meter, a Matter controller that runs the load balancing, an optional SG-Ready module for a heat pump, and Thread repeaters when a device is too far from the controller. All Matter 1.4 over Thread. Not yet Matter certified (CSA); certification on the customer's request.
- [GridShield controller and receiver (GS-C-01 / GS-R-02)](https://edgetech.eu/products/gridshield.md), € 370 excl. VAT: ElaadNL-compliant GridShield over LoRa point-to-point: one hardware, two roles, sold as two products. The controller measures the main connection and sends the reduce signal; the receiver limits chargers over RS485 and other loads with two relays. Tested against ElaadNL's implementation in both directions. For neighbourhood congestion and for buildings, car parks and sites without a data cable.