Products

Our electronics in a generic grey box with a fixed charging cable. Mode 3, up to 3×32 A, RDC-DD included, open Modbus protocol. Option: three-colour status lights. The charger for installers and wholesalers who want a reliable unit without a brand story.

Our main charger: the same grey box and electronics as the simple charger, with a transparent lid and a display behind it that shows charging state, current and energy. Use it as it is, or with your own shroud or front: a white-label charger under your name, with the MyCharger app under your name if you want it. From there it is a short way to your own enclosure and electronics through engineering.

Up to 12 cars on one shared 3×35 A connection. Up to 12 plugs per pole between 6 + 6 parking spaces, or spread over more poles. Every car plugged in for at least 8 hours gets at least 50 km added, even with all 12 plugs in use (cars that charge on three phases). Cars can stay plugged in, and charging can follow a flexible energy contract.

Everything to build one smart, load-balanced charge point: charge controller with 6 mA DC leak detection (RDC-DD), P1 site controller, cabling, brackets and the app. For installers and wholesalers who assemble their own.

Current-generation site controller. Reads the DSMR/ESMR 5 smart meter through its P1 port, so it needs no clamps, sees import and export per phase, and dynamically limits up to 10 Edge charge controllers. Solar-surplus charging, WiFi, MyCharger app.

Home energy management on the P1 port of the smart meter. The hardware of the EVSE-SC-02 with its own firmware: it measures the home on a DSMR 5 meter, shows it on a dashboard and gives an energy report after three months (best after a year). It monitors only; it controls nothing. For households € 150 incl. VAT, excl. shipping.

First-generation site controller. Measures the main connection with three CT clamps and dynamically limits up to 4 Edge charge controllers over Modbus so the site never exceeds its main fuse. WiFi to the EdgeTech platform and the MyCharger app.

The wireless smart set: our charge controller with a Thread module, a P1 meter reader on the smart meter, a Matter controller that runs the load balancing, an optional SG-Ready module for a heat pump, and Thread repeaters when a device is too far from the controller. All Matter 1.4 over Thread. Not yet Matter certified (CSA); certification on the customer's request.

ElaadNL-compliant GridShield over LoRa point-to-point: one hardware, two roles, sold as two products. The controller measures the main connection and sends the reduce signal; the receiver limits chargers over RS485 and other loads with two relays. Tested against ElaadNL's implementation in both directions. For neighbourhood congestion and for buildings, car parks and sites without a data cable.